Features

• Hand-held acupuncture/trigger point stimulator
  
• Point finder and treatment probe in one tip
• Audible variable tone indicator for locating trigger points
  
• Remote extension probe for treating hard-to-reach areas
  
• Alternative for acupuncture therapy without needles
  
• Positive (tonify), Negative (disperse) or Bipolar (tonify & disperse) switch
  
• Trigger point Search and Stim button
  
• Adjustable skin sensitivity dial
• Built in thumb grounding plate
• Battery test button
  
• LED output indicator light
  
• 1 year warranty
  
• Comes with Functional Acupuncture for
  Pain Management, (with illustrations and protocols for properly treating points for over 100 different pain disorders) Remote Extension Probe (#ETPS-RP), Carrying Case, & 1 9V Alkaline Battery
  
• Grounding Wrist Strap Sold Separately (#TENSPR-WS)
  

Technical Specifications

• Search Mode
  
• Output Parameters (skin resistance 500K ohms): Voltage 3.8 mv; Pulse Length 0.0909 microseconds; Frequency 5.518 KHz; Duty Cycle 51%
  
• Output Parameters (skin resistance 10K ohms): Voltage 71.6 mv; Pulse Length 0.0909 microseconds; Frequency 5.88 KHz; Duty Cycle 51%
  
• Stimulation Mode: Monophasic
  Output Parameters (resistance 500 ohms): Voltage .896 V; Pulse Length 213 milliseconds; Frequency 2.35
• Hz; Duty Cycle 51%
  
• Output Parameters (resistance 10K ohms): Voltage 5.25 V; Pulse Length 213 milliseconds; Frequency 2.30 Hz; Duty Cycle 51%
  
• Stimulation Mode: Biphasic
  
• Output Parameters (resistance 500 ohms): Voltage 1.38 V; Pulse Length 213 milliseconds; Frequency 1.17 Hz; Duty Cycle 50%
  
• Output Parameters (resistance 10K ohms): Voltage 10.9 V; Pulse Length 213 milliseconds; Frequency 1.0 Hz; Duty Cycle 50%
  
• Maximum Pulse Width in Stimulation Mode 213 milliseconds for all polarity settings
  
• Maximum Intensity Setting 500 ohms resistance gives 85 microamps; 10K ohms resistance gives 600 microamps
  
• Minimum Intensity Setting 10K ohms resistance gives 300 microamps
  
• Power Source 9-Volt battery