CompTENS TENS Unit

Features

• Dual channel (4-lead) analog TENS
• Three treatment modes (Normal, Burst, Modulated Rate)
• Treatment timer (15, 30, Continuous)
• Hinged protective cap for intensity dials
• Removable plastic belt clip
• Locking battery cover
• 1-year warranty
• Comes with 1 pkg of 4 reusable self-adhering electrodes, 1 set 43” pin lead wires, 1 each 9V heavy duty battery, carrying case, and instruction manual
• Leadwire reorder # LW46SPLE
  

Technical Specifications

• Channel: Dual, isolated between channels
• Amplitude: Adjustable, 0 - 80 mA peak into 500 ohm load each channel
• Output Voltage: Adjustable, 0 - 40 V peak into 500 ohm load each channel
• Waveform: Asymmetrical biphasic square pulse
• Pulse Rate: Adjustable, 2 - 150 Hz
• Pulse Width: Adjustable, 30 - 260 µS
• Modes Three: (Normal, Burst, Modulation):
  Burst (B) - Bursts occur twice per second. Pulse width adjustable, frequency fixed at 100 Hz
  Modulation (M) - Pulse rate is automatically varied in a cyclic pattern over an interval of nominally 10 seconds (max. 150 Hz) Pulse rate decreases linearly over a period of 4 seconds from the control setting value to a value which is 40% less. The lower pulse rate will continue for 1 second, then increase linearly over a 4 second period to its original value. The original pulse rate will continue for 1 second. The cycle is then repeated.
• Timer: 15 minutes, 30 minutes, or continuous
• Power Supply: One 9-volt battery
• Size: 9.5 x 6.5 x 2.35 cm
• Weight: 115 grams with battery